The 2 Meter and 70 cm CSRA Amateur Radio Frequencies have been entered into the CHIRP Software and are available below for download. The CSRA Amateur Radio Frequencies are entered numerically by frequency. Only analog frequencies have been entered. There are two groups of frequencies. The first group of frequencies starts at channel 001 and is only the repeater frequency. The second group of frequencies start at channel 050 and is the same repeater order but each repeater has 3 entries: Repeater, Direct (AKA Simplex or Talk Around) and Reverse.
Below explains the alpha tags if they are chosen to be used.
The repeater channel is labeled with the output frequency of the repeater. Generally the alpha tag can be turned off in amateur radios to allow the TX frequency to display while transmitting. This is a user preference.
The reverse channel is labeled with the latter part of the output frequency of the repeater plus "REV" to indicate reverse or will show the input frequency on the display.
Channel Labeling example:
Ch. Name | RX Freq. | TX Freq. | Type of Operation |
444800 | 444.8000 | 449.8000 | Repeater |
800D | 444.8000 | 444.8000 | Simplex/Talk Around/Direct |
800REV | 449.8000 | 444.8000 | Reverse |
SOFTWARE:
The website below has a wealth of info regarding the Baofeng radios and should be browsed to get familiar with the Baofeng radios. It is a wonderful website!
RADIO CODEPLUGS:
(**REMEMBER!!! To always IMPORT the profile below after you read your radio, otherwise you will overwrite the firmware in Baofeng radios which typically keeps the radio from passing audio on receive which then require a firmware reset.)
CHIRP (ALWAYS IMPORT)
Icom T90A
If you find and error or have additions or deletions please email
radios@augustaham.net and we thank you for your input!